REMACLEAN PUR-F300
F-Series – for use on the pulley
This system is suitable for pre-cleaning the conveyor belt
load-bearing side at the head pulley for belt speeds up
to 10 m/s and drum daimeters of 630 mm and above.
The individual polyurethane segments of REMACLEAN
PUR-F300 are firmly connected to the system carrier
and at the same time flexible, so that the segments can
optimally adjust to the conveyor belt surface. This allows
effective and gentle cleaning. Precise pre-tensioning
of the entire scraper blade is ensured thanks to a lever
clamping device on one or both sides.
Product details
Benefits
• High cleaning efficiency due to
optimal contact of the individual
PUR segments
• Long service life due to the use of
highly wear-resistant polyurethane
• Also suitable for reverse operation
• Suitable for heavy loads
• Low maintenance
| Technical Data | ||||||
| Conveyor Belt Width [mm] | Weight [kg] | A [mm] | B [mm] | C [mm] | D [mm] | E [mm] |
| 1000 | 260.8 | 900 | 1200 | 2400 | 260 | 150 x 100 |
| 1200 | 267.9 | 900 | 1400 | 2600 | 260 | 150 x 100 |
| 1400 | 298.0 | 1200 | 1600 | 2800 | 260 | 150 x 100 |
| 1600 | 327.7 | 1500 | 1800 | 3000 | 260 | 150 x 100 |
| 1800 | 373.7 | 1500 | 2000 | 3200 | 260 | 150 x 100 |
| 2000 | 403.5 | 1800 | 2200 | 3400 | 260 | 150 x 100 |
| 2200 | 433.3 | 2100 | 2400 | 3600 | 260 | 150 x 100 |
| 2400 | 450.0 | 2100 | 2600 | 3800 | 260 | 150 x 100 |